Latest duct cover repair Tenders | Government duct cover repair Tenders

State Government

CTN :45324076

17 Jun, 2026 NA

Korba - Chhattisgarh

Tender For replacement of metallic expansion joint assembly at economizer outlet flue gas duct of 1x500 mw bhel make boiler of unit no.v, htps, korba west.

CTN :45339077

02 Jun, 2026 NA

Bareli - Madhya Pradesh

Tender For supply and installation of interior panelling, partition frame and frp modular toilet for middle basic unit (ndtc/ec-01, mc-02 & tc-01) of vande bharat chair car rake as per specification icf/md/spec-385, rev-00 with amendment no.1 to 5 & annexure-i including pasting of 3m brand film or equivalent of 80 microns thickness on the inner side of double sealed window glass and supply and installation of following items (1) exhaust duct assembly arrangement as per mcf design l. no.- rbl- md56211 dated - 08.05.25, (2) hinged glass door for fire extinguisher shall be as per icf cai no- b-2024/05 instead of fixed polycarbonate glass. (03) installation of acrylic cover sheet for emergency hammer arrgt., in trainset coaches as per icf cai no.- b-2024/06 (4) replacement of existing wash basin drain pipe with modified wash basin drain pipe as per icf cai no.- a-2025/06 . note -1 :for spare: following items for middle basic unit to be supplied in a separate box (1) toilet door - 1 nos. (2) toilet door latches/ handles- 2 nos. (3) toilet mirror - 2 nos. (4) toilet led light - 2 nos. (5) toilet tap - 2 nos. (6) toilet wash basin sink - 1 nos. (7) toilet dust bin door -1 nos. (8) toilet dust bin container - 1 nos. (9) window roller blind 16 nos. and (10) electrical cubicle doors - 1 set. . note -2: bom & drawings must be submitted at the earliest for approval after placement of po. so that timely approval for the same may becommunicated before prototype approval. note-3:annexure-improvements-vande bharat chair car coaches is applicable. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45199250

02 Jun, 2026 NA

Bareli - Madhya Pradesh

Tender For corrigendum : supply and installation of interior panelling, partition frame and frp modular toilet for middle basic unit (ndtc/ec-01, mc-02 & tc-01) of vande bharat chair car rake as per specification icf/md/spec-385, rev-00 with amendment no.1 to 5 & annexure-i including pasting of 3m brand film or equivalent of 80 microns thickness on the inner side of double sealed window glass and supply and installation of following items (1) exhaust duct assembly arrangement as per mcf design l. no.- rbl- md56211 dated - 08.05.25, (2) hinged glass door for fire extinguisher shall be as per icf cai no- b-2024/05 instead of fixed polycarbonate glass. (03) installation of acrylic cover sheet for emergency hammer arrgt., in trainset coaches as per icf cai no.- b-2024/06 (4) replacement of existing wash basin drain pipe with modified wash basin drain pipe as per icf cai no.- a-2025/06 . note -1 for spare: following items for middle basic unit to be supplied in a separate box (1) toilet door - 1 nos. (2) toilet door latches/ handles- 2 nos. (3) toilet mirror - 2 nos. (4) toilet led light - 2 nos. (5) toilet tap - 2 nos. (6) toilet wash basin sink - 1 nos. (7) toilet dust bin door -1 nos. (8) toilet dust bin container - 1 nos. (9) window roller blind 16 nos. and (10) electrical cubicle doors - 1 set. . note -2 bom & drawings must be submitted at the earliest for approval after placement of po. so that timely approval for the same may be communicated before prototype approval. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45063622

30 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of 25vkoc005 c c - joint , main bolts , inner star , gfl bolts , gfl washer , clamping collar , clamp , valve for water pump , bush , fresh water cooler relience make , spare part kit for fw/sw heat exchanger , starting air conn.inlet , engine inlet pressure connection , governor speed setting air inlet connection , rack position limiter , fuel rack indicator , pressure transmitter p5r-4bar-4-20-1/2-pe , pitch indicator 0-20ma , pl96 , relay 4no-nc 24v dc , solenoid valve (nomo-24 vdc) , cd3 cable (5mm) , safeties reset push button , emerg. stop push button , scanner thermocouple pcb , display pcb , press.sw. (item no.17 of engraved ckt) , pressure regulator , pneu p.b. pneu return red , pneu. switch , s w engine driven pump assembly , stud m12 40 30n j12 nse1 181 , oring an7 31b6 , o ring 151i d 3d nse6.531 21a7 , filtering unit , viton oil seal 15x30x10 , fuel filter element , protect cyl head tie rod , injector body extractor , inj.pump and pump head extractor , flexible hoses , high pressure hand pump , bearing unit , bush sealing , bolt-connecting rod , o ring , thrust -stopper , top spring collar (bar) , bottom spring collar , dunb bushes 25-25 du , shaft , seal bearing housing , coupling pin , sealing joint , bs ring , type c30 , nse 6.51 , 20 , paper insert , o ring , needle roller bearing , rucompensation probe for exh. pyrometric duct , hydraulic jack for cylinder head , tool valve guide extractor , tool cylinder head test pressure , flex hose for hydraulic tool , high pressure hand pump , tee connection , safety valve , water pump impeller , scraper ring , round gasket , flexible hose for air , spare gauge glass 583 , sealing bush , piston ring , safety ring for abb vtr251-2p t/c , gfl washer , pressure switch(p 16 bars) , pressure switch(p 19 bars) , normal stop electro distributor , circuit selector , tt-314 sensor for main engine fresh water temperature , 25 pin sub d female connector , pressure gauge forbes marsh 100ss , ss316 0-4 bar glyf fil , pressure gauge forbes marsh ss316 0-40 bar glyf fil , pressure switch for s/by pp (range 0-4 bar) , pneumatic distributor pneu/pneu , sph card (sph) , lub oil pressure safety , pressure switch-1 to 10 bar , bearings individual alarm card (aip) , convertor module t454 t456 lub oil temp , svae - over speed cards , engine speed indicator 0-1250 rpm 96x96 , cock with filter , distributor iso 541 pneumatic spring , distributor iso 541 pneumatic/spring , iso1 distributor pneu.control/pneu.return , switch 3 pos. (1tc , auto , 2tc) , engine control unit (ecu) , gasket , fuel pipe m14xm14b , parallel , 750l , 9.0 i.d. , sae 100 r6 , booster servo motors with connectors , meta flex gasket , meta flex gasket , meta flex gasket , fuse 0.5a , link cable pc/tsx plc length -3mtr , oil pressure security card (sphem) , speed raise lower actuator 2no contacts , touch screen color display unit , 3 position switch , fuel pipe(return) m12x1.5 male plugxm14 x1.5 banjo(700mm) , universal crimping tool , oil mist detector , time delay relay (off delay) , pyrometric duct bank a

CTN :45265638

19 Jun, 2026 NA

Kolkata - West Bengal

Tender For air supply duct assembly of rmpu for mr-400 series rake as per drawing no.- mr/poh/medha-4-0-001 [ warranty period: 30 months after the date of delivery ] ]

CTN :45252333

09 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of t/c speed sensor , flange with coupling , cross piece , male plug , oil pump casing , oil pump special nut , plug , flange , tightening ring , cover , alu shim , return line to cr case , pipe clamp , elastic mountings tsc t140/70 d , gasket , o-ring , o ring-an33 nse6.5 21a7 , fuel feed pump- cw engine , limit switch box , rubber compensating sleeve dn40 pn16 lf130 , rubber compensating sleeve dn80 pn16 lf130 , pipe , temperature sensor , turbocharger speed tranmitter , sleeve flexmaster gm10006-20 nbr , tab washer dn 12 , gasket , piston ring , o- ring , gasket , equipped cylinder head , o ring 15x204 viton (20209) , o ring 5x589 viton (20312) , peak pressure indicator , spherical bearing ge505w , inlet thermostatic valve , fw level switch , immersion heater , over speed solenoid valve , pressure gauge , spring washer packing , sealing ring , hex headed screw , hex headed screw , locking plate , cap nut , main bearing assly , bearing , eccentric shaft , gov driving gear pinion , ball bearing box , pair of bevel gears , bevel pinion , shim , safety valve in oil cct assly , water outlet part , duct , bs ring , joint , o ring no 87 21a7 , flexmast coupl(pipe-88.9mm-o.d) , joint , joint dn 150 , bolt m16x110l 8.8 with 2mm loc , injector pump pin , locking bolt m14-60 29 u 10.9 , water pump pinion , oil seal , internal circlip , shim , mech.seal for balmo f.f.pump , seal-balmo fuel feed pump , flexmast conn gm10006-038 (38 od) , flow switch for l.o. priming safe , joint press seal(p.18) 26x18 , safety valve , gasket , set of gasket for filter+hyd , set of full flow filtering elements , servo booster for pga 12 governor , temp sensor exhaust , fuel feed pump-ccw engine , set of oil seal 19x30x7 for aroto g15sp(ffp) , fuel feed pump-aroto-g15sp-fr ccw eng , drive rotor , driven rotor , packing at both end , mechanical seal , 25 pin socket insert plug jaeger , injector assembly , sleeve dn80 pn16 , lub oil thermostatic valve range 63/71 deg c , thermostat element , shim injection pump , o ring , expansion bellow , air staring vale , hose pipe mod 16 sae 100r5 l 220mm , flexible hose , rubber compensating sleeve dn65 pn16 lf 130 , ruber compensating sleeve dn150 pn16 lf130 , air distributor , loctite 648 , fuel clogging indicatior , sensor ref 19127sc , sensor ref 1950sc , switch for manual stop-xck-j265 , proximite detector mod 9984-2102 , breaker switch type zckj2 , starting air valve , 2 way pneumatic valve , o ring , disc spring dia 25xdia 12.5x1.5 , inner star for tacoma opvs , duplex fuel filter , filter element for 2-stage marin engine , injector calibration pump , temperature regulating pn40dn100 , pneumatic stop valve , pressure regulating valve , pressure switch , thermometer 0-100 , temp.sensor mbt4-s-90-m18x1.5-ef3 , thermostat element for naval opv , seal kit , circulation heater element for ktmi opv , thermostat for circulation heater for ktmi opv , fuel filter element for filter type-20251261751032 , over speed air lowpresure switch raing bar , l o p gear , non return valve , screw plug , packing perform , hydropneumatic pump with hoses , stud , circlip external-65mm , circlip external 90 mm , core plug hex.head 1/2 , rocker arm equipped , contact (aux) , o , ring , cup plug , exhaust gasket , anode , thermometric duct , inner star

CTN :45021687

29 May, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : supply of supply, installation and commissioning of rig inlet duct assembly

CTN :45241380

01 Jun, 2026 NA

Bareli - Madhya Pradesh

Tender For supply of rmpu drain duct assembly for amrit bharat coaches. as per drg. no. 828-1-0-004 alt. nil. packing condition: pi042 ver.1. or latest version will be applicable. [ warranty period: 96 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45241022

22 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of set of items for tsc air duct assembly set consisting of two items detailed below, 1- bolt drilled hex head 5/8 inch -18 tpi x 1-5/8 inch, air duct to support pad as per emd pt.no. 8400470 and dlw pt.no. 19016062. qty - 04 nos, 2-washer special 5/8 inch as per emd pt.no. 8282178 and dlw pt.no. 19394111. qty - 04 nos. [ warranty period: 30 months after the date of delivery ] ]

CTN :44948111

26 May, 2026 NA

Bareli - Madhya Pradesh

Tender For corrigendum : supply and installation of interior panelling, partition frame and frp modular toilet for middle basic unit (ndtc/ec-01, mc-02 & tc-01) of vande bharat chair car rake as per specification icf/md/spec-385, rev-00 with amendment no.1 to 5 & annexure-i including pasting of 3m brand film or equivalent of 80 microns thickness on the inner side of double sealed window glass and supply and installation of following items (1) exhaust duct assembly arrangement as per mcf design l. no.- rbl- md56211 dated - 08.05.25, (2) hinged glass door for fire extinguisher shall be as per icf cai no- b-2024/05 instead of fixed polycarbonate glass. (03) installation of acrylic cover sheet for emergency hammer arrgt., in trainset coaches as per icf cai no.- b-2024/06 (4) replacement of existing wash basin drain pipe with modified wash basin drain pipe as per icf cai no.- a-2025/06 . note -1 for spare: following items for middle basic unit to be supplied in a separate box (1) toilet door - 1 nos. (2) toilet door latches/ handles- 2 nos. (3) toilet mirror - 2 nos. (4) toilet led light - 2 nos. (5) toilet tap - 2 nos. (6) toilet wash basin sink - 1 nos. (7) toilet dust bin door -1 nos. (8) toilet dust bin container - 1 nos. (9) window roller blind 16 nos. and (10) electrical cubicle doors - 1 set. . note -2 bom & drawings must be submitted at the earliest for approval after placement of po. so that timely approval for the same may be communicated before prototype approval. [ warranty period: 30 months after the date of delivery ]

Duct Cover Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector